In the process of using the hydraulic workholding

In the process of using the hydraulic workholding, the surface of the metal workpiece is rolled, the surface layer will be reinforced with the ultimate strength and the yield point will increase, so that the use performance, wear resistance, corrosion resistance, fatigue resistance of the hydraulic workholding Strength, etc. have been significantly improved, after rolling, the hardness can be increased by 15 to 30%, while the wear resistance increased by 15%.

hydraulic workholdings can be rolled to increase the surface roughness from Ra6.3 to Ra2.4 to Ra0.2. And it has high production efficiency, and some workpieces can be completed in minutes or seconds. Rolling process can solve the key problem that some current process methods are not easy to realize. For example, processing of a large cylinder. At the same time, it also applies to the finishing of special holes or the finishing of certain special materials.

When the hydraulic workholding is in use, the hydraulic oil is strictly selected for use. In the process of use, the hydraulic oil is strictly selected according to the standard of the oil used, and the hydraulic oil of good quality is used when it is used, so that the hydraulic oil can be used to a certain extent. Effectively prevent its hydraulic system from appearing bubbles during operation.

During the process of selecting the oil, the hydraulic workholding will effectively select the lowest temperature in different regions, then effectively fill the hydraulic oil according to its dipstick standard, and also need to keep the hydraulic system clean while using it. Always inspect the oil, oil level, and oil color of the hydraulic fluid. If you find blisters or foam in the fluid, or if the oil turns milky, you should carefully look for the source of the air in the fluid and eliminate it in time.

When the hydraulic workholding is in use, it can effectively prevent its oil temperature from being too high, so that it can reduce its hydraulic shock to a certain extent and reasonably design the heat dissipation system. When it is used, it can effectively prevent the oil temperature from being too high, and it is to maintain the hydraulic oil. The key to normal temperature, if there is an abnormality, you should find out the reason and eliminate it in time.